產品概述  Overview

提供變電站全模塊化裝配式解決方案，使占地面積減少30%，系統設計、安裝和調試周期縮短70%；采用全金屬預制艙，配置智能環境控制系統，可適用于高溫、高濕、沙塵等復雜的氣候和地理環境；支持eCloud 能源云平臺接入，提供遠程健康診斷、故障分析、維護指導等功能，實現變電站的無人值守和設備的全生命周期管理；運行可靠，品質保證。

Provide a fully modular assembly solution for substations, reducing floor space by 30% and shortening system design, installation, and debugging cycles by 70%; Adopting all metal prefabricated cabin and equipped with intelligent environmental control system, it can be suitable for complex climate and geographical environments such as high temperature, high humidity, sand and dust; Support eCloud energy cloud platform access, provide remote health diagnosis, fault analysis, maintenance guidance and other functions, and achieve unmanned substation and full lifecycle management of equipment; Reliable operation and guaranteed quality.

技術參數  Technical Parameter

風力發電、光伏發電、海上風電、分布式光伏發電等新能源領域升壓站

電網10kV ～ 40.5kV 變電站

大型廠礦企業自用變電站

Booster stations in new energy fields such as wind power, photovoltaic power, offshore wind power, and distributed photovoltaic power generation

10kV~40.5kV substations in the power grid

Substation for self use by large factories and mining enterprises

使用環境  Usage environment

環境溫度范圍為：-40℃ ~+85℃；

安裝地點：戶外；

海拔一般不超過3000m；

防穢等級：Ⅲ級；

戶外風速不超過35m/s；

防震：水平加速度0.3m/s2；

垂直加速度不大于0.15m/s2；

超出上述正常使用環境條件時，本公司可根據用戶使用要求進行個性化設計。

The ambient temperature range is -40 ℃~+85 ℃ ;

Installation location: outdoor;

The altitude generally does not exceed 3000m;

Pollution prevention level: Level III;

Outdoor wind speed not exceeding 35m/s;

Shockproof: Horizontal acceleration of 0.3m/s2;

The vertical acceleration shall not exceed 0.15m/s2;

When the above normal usage environment conditions are exceeded, our company can customize the design according to the user's usage requirements